Tabla de contenido
Publicidad
4. Place the memory shield and slide it towards the left side of the computer to cover the memory module.
5. Replace the (M2x3) screw to secure the memory shield to the memory module.
Next steps
1. Install the keyboard.
2. Install the
keyboard
lattice.
3. Install the battery.
4. Install the
base
cover.
5. Install the
SD
card.
6. Follow the procedure in
del disipador de calor
Removing the heat-sink assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
About this task
The figure indicates the location of the heat-sink assembly and provides a visual representation of the removal procedure.
Steps
1. Peel the power-adapter cable from the heat-sink assembly.
2. Disconnect the two fan cables from the connectors on the system board.
3. Loosen the eight captive screws that secure the heat-sink assembly to the system board.
NOTE:
Loosen the captive screws in the order stamped onto the heat-sink assembly next to the screws [1 > 2 > 3 > 4
> 5 > 6 > 7 > 8].
after working inside your
computer.
before working inside your
computer.
Desmontaje y reensamblaje
43
Publicidad
Tabla de contenido
