Tabla de contenido
Publicidad
Steps
1. Carefully route the keyboard and keyboard backlight cable through the inner frame and place the inner frame on the computer chassis.
2. Replace the six (M2x5) and the nine (M2x3) screws to secure the inner frame in place.
3. Route the WLAN and WWAN antenna cables through the routing guide.
Next steps
1. Install the
WLAN
card.
2. Install the
WWAN
card.
3. Install the
primary M.2
SSD.
4. Install the battery.
5. Install the
base
cover.
6. Install the
SD
card.
7. Follow the procedure in
Compartimento para tarjetas inteligentes
Removing the smart-card reader
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
primary M.2
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
after working inside your
computer.
before working inside your
SSD.
computer.
Desmontaje y reensamblaje
51
Publicidad
Tabla de contenido
