Operation; Starting - Skymsen PA-7 Manual De Instrucciones

PICTURE 05
03
04
01
02

3. Operation

3.1 Starting

Before turning the equipment ON:
-Make sure the Chamber Lid is closed and properly locked;
-Make sure the Small Stumper is properly placed inside the Opening;
-Make sure the General Switch is on position "I" (ON) and if the plug is connected;
To start the equipment, follow these steps:
Step 1: Press the OFF Switch to reset the machine;
Step 2: Press the ON Switch to start the machine;
After this procedure, the equipment should start. If this does not happen, verify the
possible causes and solutions stated on item 5 of this manual. (Analyses and Problem
Solving).
12