Maintenance; Warning; Analysis And Problems Solving; Problems Causes And Solutions - Skymsen PA-7 Manual De Instrucciones

Check the level of oil.
Do NOT insert your fingers in between belts and pulleys nor chains and gears.

4.6 Maintenance

4.6.1 Danger
Any maintenance with the machine in working situation is dangerous.
TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Always remove the plug from the socket in any emergency situation.

4.7 Warning

Electrical or mechanical maintenance has to be undertaken by qualified personnel.
The person in charge of maintenance has to be sure that the machine is under TOTAL
SAFETY conditions when working.
5. Analyses and Problem Solving

5.1 Problems Causes and Solutions

The equipment has been designed to need minimum maintenance, however, some
performance failures may happen due mainly to natural worn out, caused by the use of
the Processor.
If some problems arise with your Processor check Table - 04 below where there are detailed
some possible solutions
19