Cleaning And Sanitizing - Skymsen PA-7 Manual De Instrucciones

c – The third device turns the motor of the machine OFF in case of overheating. Wait for
some minutes until the machine gets cold and turn it back ON, pressing the ON Switch.
It is not recommended to let the equipment running without any product inside.
To increase the equipment´s life span, switch it OFF when not in use.
The out load of the products happens by gravity. Inside of the Chamber and the
out load Throat shall be regularly cleaned to avoid obstruction.

3.3 Cleaning and Sanitizing

Do never clean the equipment if connected to the electric network.
Step 1: Turn the General Switch OFF and unplug the equipment.
Step 2: Disassemble the equipment (Item 2.2.1).
Step 3: Wash the removable parts with warm water and neutral soap.
Never spray water on the equipment, excepting the removable parts, when
Step 4: When washing the plates, handle them with care. Do not throw them one against
the other neither against other objects, in order to save the knives.
Use steel gloves to handle the plate The knife have sharp edge that may wound the
Step 5: To clean the Motor Housing and the Plate Chamber use a wet cloth with hot water
and neutral soap.
14
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
removed.
IMPORTANT
operator.