Replacing The Pedal Plunger - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-22 Replacing the Pedal Plunger

1. Remove the Cover (M).
2. Remove the Holder.
3. Pull out the Plunger from the Holder, and replace the Plunger with a new one. When
installing a new plunger, apply light grease to the entire contacting surface between
the plunger's holder and plate.
Plunger
4. Remove old grease from the plate surface on the pedal, and apply new grease.
5. Reassemble in reverse order.
•
After replacing the Plunger, go to Test Mode to check operation.
(see 6-2-3-3 page 61)
(See 7-2-1(3) page 71).
(See7-2-1-(4) page 72)
Holder
Spr ing (B)
Plate
Apply grease.
97