Day-To-Day Storage; Maintenance; Cleaning The Unit; Cleaning And Replacing Cleaning Pads - ECOVACS WINBOT 7 Serie Manual De Instrucciones

6. Day-to-day Storage

7. Product Maintenance

7.1 Cleaning the Unit

7.2 Cleaning and Replacing Cleaning Pads

7.3 Squeegee

7.4 Cleaning Driving Treads

Store the Winbot in the original box, in a cool, dry place to protect electronic
●
components.
Do not store the Winbot close to liquids or where the liquid might be spilled onto
●
it.
Abide by maintenance requirements for the unit as described in Section 7 of this
●
Instruction Manual.
Before cleaning the Winbot, move the switch under the handle to the OFF
●
position (far left) and unplug it from the electrical source.
Clean the top of the Winbot with a damp cotton cloth.
●
Do NOT clean the Unit with any volatile liquid, solvent, or a detergent containing
●
acidic ingredients as they can damage the plastic.
After each cleaning cycle, or if the Cleaning Pads become very dirty, they can be
●
rinsed in clear warm water and allowed to dry completely (generally 24 hours)
before re-attaching. The Cleaning Pads are also machine washable. An
additional set of Cleaning Pads may be purchased by calling Customer
Service at 1-888-966-0895 or visit www.ecovacs.com.
After each use, gently wipe the Squeegee on the bottom of the unit with a damp,
●
not wet, cloth to remove residue from its surface. (A wet cloth will allow water to
get inside the unit and cause damage to the internal components.)
After each use inspect the Driving Treads for possible accumulation of dirt. The
●
entire Driving Tread can be inspected by using the Remote Control and
pressing the Forward or Reverse arrow. Clean any dirt with a soft damp cloth.
NOTE: Dirty Driving Treads can negatively affect the function of the treads
guiding the unit on the window.
Live Smart. Enjoy Life.
EN
12