Technical Data Sheet - Trox Technik X-CUBE Instrucciones De Servicio

Modulating damper actuator for
operating air control dampers in
ventilation and air-conditioning systems
for building services installations
• For air control dampers up to
2
approx. 8 m
• Torque 40 Nm
• Nominal voltage AC/DC 24 V
• Control: modulating DC 0 ... 10 V,
position feedback DC 2 ... 10 V
Technical data
Dimensions / Weight
Safety notes
www.belimo.com

Technical data sheet

Electrical data Nominal voltage
Nominal voltage range
Power consumption In operation
Connection
Functional data Torque (nominal torque)
Control
Position feedback (Measuring voltage U)
Posotion accuracy
Direction of rotation
Direction of rotation at Y = 0 V
Manual override
Angle of rotation
Running time
Sound power level
Position indication
Safety Protection class
Degree of protection
EMC
Mode of operation
Rated impulse voltage
Control pollution degree
Ambient temperature range
Non-operating temperature
Ambient humidity range
Maintenance
Dimensions
Weight
• The damper actuator is not allowed to be used outside the specified field of application,
!
especially in aircraft or any other form of air transport.
• Assembly must be carried out by trained personnel. Any legal regulations or regulations
issued by authorities must be observed during assembly.
• The device may only be opened at the manufacturer's site. It does not contain any parts
that can be replaced or repaired by the user.
• The cable must not be removed from the device.
• When calculating the required torque, the specifications supplied by the damper
manufacturers (cross section, design, installation site), and the air flow conditions must
be observed.
T2-GM24A-SR • en • v2.1 • 06.2007 • Subject to changes
AC 24 V, 50/60 Hz
DC 24 V
AC/DC 19.2 ... 28.8 V
4.5 W @
At rest
2 W
For wire sizing
6.5 VA
Cable
1 m, 4 x 0.75 mm
Min. 40 Nm @ nominal voltage
Control signal Y DC 0 ... 10 V, typical input impedance 100 kΩ
Operating range DC 2 ... 10 V
DC 2 ... 10 V, max. 1 mA
±5%
Reversible with switch 0 / 1
bei Schalterstellung 0
Gearing latch disengaged with pushbutton, detentable
Max. 95° , limited on both sides
by means of adjustable, mechanical end stops
150 s / 90°
Max. 45 dB (A)
Mechanical, pluggable
III Safety extra-low voltage
IP54 in any mounting position
CE according to 89/336/EEC
Type 1 (EN 60730-1)
0.8 kV (EN 60730-1)
3 (EN 60730-1)
–30 ... +50°C
–40 ... +80°C
95% r.H., non-condensating (EN 60730-1)
Maintenance-free
See «Dimensions» on page 2
Approx. 1'700 g
GM24A-SR
nominal torque
2
or 1
1 / 2