Trox Technik X-CUBE Instrucciones De Servicio página 176

Technical features:
• PFC (active)
• Integrated PID controller
• Control input 0-10 VDC / PWM
• Input for sensor 0-10 V or 4-20 mA
• Slave output 0-10 V max. 3 mA
• Output 20 VDC (±20 %) max. 50 mA
• Output 10 VDC (+10 %) max. 10 mA
• RS485 MODBUS
Connector Connection Assignment / function
PE PE Protective earth
KL1
N Mains 50/60 Hz. neutral
L Mains 50/60 Hz, phase
KL2 NC Status relay, floating status contact, break with error
COM Status relay, floating status contact, changeover con-
tact, common connection (2 A, 250 V, min. 10 mA, AC1)
NO Status relay, floating status contact, close with error
Fan
K3G 250-AV29 -B2
K3G 280-AU11 -C2
K3G 310-BB49 -02
K3G 310-AZ88 -02
K3G 355-AY40 -02
K3G 400-AQ23 -01
K3G 450-AQ24 -01
K3G 450-AZ30 -01
K3G 500-AP25 -01
K3G 500-AQ33 -01
K3G 560-AP23 -01
K3G 560-AQ04 -01
Electrical connections EC
• Alarm relay
• Line undervoltage detection
• Motor current limitation
• Over-temperature protected electronics / motor
• Locked-rotor protection
• Soft start
KL3
Wiring diagram
L7)
L6)
M3)
M3)
M3)
M3)
M3)
M3)
M3)
M3)
M3)
M3)
L7)
KL2 KL1
Connector Connection Assignment / function
KL3 OUT
GND
0-10 V / PWM
+10 V
+20 V
4-20 mA
0-10 V / PWM
GND
RSB
RSA
RSB
RSA
Master output 0-10 V max. 3 mA
GND
Control / Actual value input (Impedance 100 k
Supply for external potentiometer,
10 VDC (+10 %) max. 10 mA
Supply for external sensor,
20 VDC (±20 %) max. 50 mA
Control / Actual value input
Control / Actual value input
GND
RS485 interface for MODBUS RTU; RSB
RS485 interface for MODBUS RTU; RSA
RS485 interface for MODBUS RTU; RSB
RS485 interface for MODBUS RTU; RSA
)
Ω
91