BMW Mark IIi Manual Del Usuario página 54

Unplug existing 1-pin socket contact (3) from plug-in location PIN 9, red/green wire, from black 17-pin socket
housing of on-board monitor radio plug connector X18126.
Connect unplugged 1-pin socket contact (3), red/green wire, to supplied black 2-pin socket housing (2) at plug-in
location PIN 1.
Connect socket contact from branch B4, red/white wire, to black 17-pin socket housing of on-board monitor radio
plug connector X18126 at plug-in location PIN 9.
Connect branch B2, black 2-pin pin housing to black 2-pin socket housing (2).
Now close black 17-pin socket housing of on-board monitor radio plug connector X18126 and connect to on-board
monitor radio.
Concluding jobs
Reassemble parts in reverse order of removal.
Reconnect battery.
Carry out function check.
Print out fault code memory.
Encoding
This system does not require encoding.
See Fig. H for system coding.
EN 2-35