Publicidad
Step 1. Fasten the blade locking plate and blade to the fan
Step 1. Fasten the blade locking plate and blade to the fan motor
assembly by using the two blade screws .
assembly by using the two blade screws .
Note: When installing the blades, ensure the sides with
"THIS SIDE UP" face the ceiling.
INSTALL THE UP HOUSING
INSTALL THE UP HOUSING
Step 1. Install the up housing to the fan motor assembly by using the
five up housing screws.
Note: please make sure using the right 5pcs up
housing screws. If using blade screws to install the up housing by mistake,
it will damage the motor.
Note: Ensure the up housing cover the edge of all five blades.
Fan motor
assembly
motor
Up housing screw
Up housing screw
Fan blade
Fig. 15
Blade locking plate
Blade screw
Up housing
Up housing
Fig. 16
Fig. 16
Publicidad
