Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
Possible component damage: Do not use a screwdriver to tighten the drive tray latch
knob.
15. Turn the knob all the way to the right to engage the latch and clamp it firmly into the frame.
16. Pull back on the tray to make sure the tray is securely latched. It should not move.
17. Connect the drive SCSI connector, P903, to the drive.
18. Connect the drive power cable, P904A/B, to the library.
19. Connect the serial interface connector, P6A/B, to the library.
3
2
96051
1. P903
2. P904A/B
3. P6A/B
1
L201_210
Sixth Edition
Removing the Existing Library
1-5
Publicidad
Tabla de contenido
