Removing the Existing Library
CAUTION:
Possible equipment damage: Make sure the SCSI cable does not block the fan before
you close the drive door.
Possible cable damage: Make sure you move the SCSI cable out of the way before
you close the drive door.
Possible component damage: Do not use a screwdriver to tighten the drive door
latch knob.
20. Close the drive door and secure it by turning the drive door latch knob to your right.
21. Repeat the drive steps for every drive tray.
CAUTION:
Initialization fault: You must keep the personality module and reattach it to the
replacement library.
22. Remove the personality module from its connector.
1. Personality module
1-6
Sixth Edition
96051