Important - Mowox RM 30 Li Instrucciones De Funcionamiento Originales

7. Do not use the robotic mower for any other purpose than cutting lawn.
Transportation
To safely move from or within the working area:
1. Press the red STOP button to stop the robotic mower.
2. Ensure that the main power isolation switch is selected to OFF position before you lift
up your robotic mower.
3. Close the top covers and carry the robotic mower on the rear handle, the blade disc
directed away from your body.

IMPORTANT!

Maintenance and special Instructions
Always switch off the main isolation switch of the robotic mower before clearing blockage/
checking/ cleaning/ working on it or replacing the blade. Never attempt to service or adjust
the mower while it is in operation.
In case of abnormal vibrations, stop the mower, switch off the main power switch and check
for any damage of the blades. Replace worn or damaged blades to preserve balance. If
vibration continues, call for service.
Use heavy gloves when inspecting or servicing the blade.
Do not perform maintenance when barefoot or wearing open sandals. Always wear suitable
work shoes and long trousers;
Replace worn or damaged parts for your safety.
Use only original equipment and accessories. It is not permitted to modify the original
design of the robotic mower. All modifications are made at your own risk and void the
warranty.
Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
Warning!
Batteries
1. Do not open or damage the battery pack.
2. Do not short-circuit or throw the battery pack into fire.
3. Replace batteries if mechanical impacts, water ingress or if any damage are visible.
4. The battery pack contains electrolytes. In case of an electrolyte leakage from the
battery pack, the following actions must be taken:
5. Skin contact: Wash off the contact areas with water and soap immediately.
6. Eye contact: Flush the eyes with plenty of clean water immediately for at least 15
minutes, without rubbing. Get immediate medical treatment.
7. Ensure that the battery pack is charged inside the device only.
8. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid
Rev 19
Keep the original packaging for shipping purposes.
When there is a risk of a lightning, disconnect the perimeter wire from the
base station, and unplug the transformer plug from the power source.
4 (EN)