Cutting And Heading Home - Mowox RM 30 Li Instrucciones De Funcionamiento Originales

The display then displays selected operating time (always including charging interruptions)
and charging status.
Key options
Soft On/ Off switch: Ensure that the main interruption switch underneath the
handle ist turned to on firstly. Then you can switch the mower on with this
button.
Lock indicator.
Warning: There's a problem..
OK key: Confirm settings.
which the robot confirms with a double beep tone.
Working time selection: Push several times in order to change the time
programme. Also button "1" for PIN input.
Start
button "2" for PIN input.
Home key: Send the robotic mower to the charging station (to be followed by
"OK" key).
Lock key: To lock the robot against theft (but it does this on its own 5 seconds
after the last entry).Also button "4" for PIN input.
6 . 2 C
6 . 2 C
U T T I N
U T T I N
1. Set the main interruption switch to "ON" position (inwards).
Rev 19
key: Push this button followed by „OK" to start the working cycle. Also
Also button "3" for PIN input.
G A N D H E A D I N
G A N D H E A D I N
Hour selection for operation time: For this
duration, the robot will do mowing/ charging cycles
each day from that time on when
pushed..
Each command must be confirmed with this button,
G H O M E
G H O M E
26 (EN)
was