Sordin left/RIGHT Active Manual De Instrucciones página 6

BATTERY-SAVING FUNCTION
To maximize battery life, the product is equipped with a battery-saving function. This function automatically switches off the electronics after 4
hours if none of the keys is pressed during this period. To switch back on, press the key in the middle of the keypad (O). About 2 minutes before
automatic switch-off occurs, a series of beeps will be heard as a warning that the hearing protector is about to be switched off. Press any key to
delay switch-off by a further 4 hours.
LOW BATTERY WARNING
Two tones will be heard when about 10-20 percent of the battery life remains. The battery warning is repeated every half hour until the batteries
are completely discharged.
BATTERY REPLACEMENT (Illustration E)
The product must be equipped with two standard alkaline batteries, 1.5 V AA/LR6. The use of rechargeable batteries such as NiMH 1.2 V or NiCd
1.2 V will significantly reduce the operating time. The battery compartment is located in the left cup. To install new batteries, remove the lid (E1)
and insert the batteries. Make sure that the + and – poles are correctly aligned (E2). Replace the lid. The product should be turned off during
battery replacement.
SOUND LEVEL LIMITATION
The output from the Level Dependent function and the FM Pro is limited to a maximum of 82 dB(A) equivalent sound level.
STORAGE
When the hearing protector is not in use, store it in such a way that the headband is not stretched and the cushions are not compressed. Keep the
hearing protector dry and clean, store them at normal room temperature and do not place them in direct sunlight.
If the product is to be stored for a prolonged period, it is recommended that the batteries be removed to avoid damage.
MAINTENANCE
Clean and disinfect the cups, cushions and inserts with mild soap and water only. This product may be adversely affected by certain chemical
substances. Further information should be sought from the manufacturer. Hearing protectors, and in particular cushions, may deteriorate with
use and should be examined at frequent intervals for cracking and leakage, for example at the start of every working shift. Do not subject the
product to rough handling, which can damage the electronics. The hearing protectors must not be immersed in water!
HYGIENE KITS (Illustration C)
The cushions and inserts are replaceable. Always replace worn or damaged parts. Remove the cushion by pulling it straight out (C1). Replace the
old cushion and insert with new ones from the hygiene kit (C2). Use only hygiene kits from the manufacturer, consisting of one pair of cushions,
distance rings and inserts. It is recommended that the hygiene kit should be replaced at least twice a year for standard use to ensure that the
noise attenuation performances are maintained.
The fitting of hygiene covers to the cushions may affect the acoustic performance of the hearing protectors.
For order reference, please refer to Table 3.
MATERIALS
PARTS
Cups
Headband
Cushions
Helmet spring, Screw
MATERIALS PARTS
ABS Height adj. Brushings, Spring cover
POM Headband Fork, Helmet Fork, Helmet
Attachment, Spring Bracket
PU + PVC
Attenuation foam
Steel
MATERIALS
TPE
PA (Polyamide)
PE (Polyether)
6