Fulbat FULLOAD 1500 Manual De Instrucciones página 3

applied in turn, which is subjected to the initial battery internal impendence detection and battery load
detection in vehicle electric system, it could be efficiently desulphated to the some batteries with deep-charge
or no charge for many months, and without any risk if it is connected to the vehicle electric system.

Charge & Maintain - Automatic Maintenance: The battery charger could be left unattended and it is full time
managed by program; when the battery is charged to "full" state, the charger automatically switches to maintain
the battery. It will monitor the battery voltage and continue to peak performance with special pulse charge in
long term maintenance.

Short circuit or Reverse polarity protection: The charger will automatically turn off when the output short circuit
or reverse polarity occurred and prevent any damage.

Never overcharge your battery

Heavy-Duty cables

Corrosion-resistant output connectors

Output clips and ring terminals provided: It comes with a quick connect fly lead and 2 different kinds of
connectors, crocodile clips and a ring terminals. The ring terminals are perfect for permanent connection to
your battery. You can connect the lead to the battery and tuck the lead away while you are using your vehicle
and when you get back to your garage simply plug the lead back into the charger.
TEMPERATURE & SAFETY PROTECTION:
The charger contains 4 safety protections:

INTERNAL OVERHEAT PROTECTION: The Fulload 1500 is built-in with overheat and overload electronic circuit.
When the charger is overheated, the charger will decrease the charging current. If temperature is decreased,
the charger will resume to normal charging.

TIMER PROTECTION: The charger provides the maximum charging timer management for each charging stage;
this condition may occur if attempting to charge any severely discharged or heavily sulfated battery. Once the
charger is timed-out, the charger will stop charging for protecting your battery and the RED LED will be slow
FLASH, while this situation occurs, please check with your battery statues.

REVERSE POLARITY: The charger has reverse battery protection. If a reverse battery exists (Red LED ON, while
output leads are connected backwards), simply unplug charger from AC power and properly remake the
connections as described in this manual.

SHORT CIRCUIT PROTECTION: The charger has output short-circuit protection. If the charger output lead short
condition exists (Red LED ON, while output leads are connected backwards), simply unplug charger from AC
power and properly remake the connections as described in this manual. The charger employs the firm hardware
and smart program to automatically detect the output connections. Once the charger detects the output short-
circuit or reverse polarity, it will not deliver any output current.
BATTERY TYPES & CAPACITY:

Suits all Lead Acid Type Batteries. (GEL, SLA, AGM, Calcium)

12 Volt Output, Charging current 1500mA

Battery Capacity: The following maximum AH capacities are to be used as a general guide only: some batteries
may be able to handle a higher Charge Current. Check with the battery Manufacturer when charging batteries
with small capacity.
Charge Current
Battery Capacity: Charging
Battery Capacity: Maintaining
ELECTRICAL PARTS:
Delivered with:

A.C Power Cord:
o
6 feet with VDE Plug

Output Lead:
o
4 feet with Trailer Connector

Extension Cord:
o
2 feet with Trailer Connector + Battery Clamp or
o
2 feet with Trailer Connector + Ring Connector
1500mA
4-30AH
4-120 AH