Fulbat FULLOAD 1500 Manual De Instrucciones página 7

o
Check electrolyte levels if possible.
(As they may need topping up with distilled water after charging)

If the Battery is in the vehicle.
o
Switch OFF and Remove the AC Power Socket from the outlet.
o
Remove the lead from the vehicle chassis.
o
Remove the lead from the battery.
o
Check electrolyte levels if possible.
(As they may need topping up with distilled water after charging)
LED STATUS INIDICATOR TABLE:
LED
Power / Fault LED – Green
/ Red
Charge / Reconditioning LED –
Blue / Yellow
Full Charge LED -Green
Status
Green ON
Green Flash
RED ON
Blue ON
Blue Flash
Yellow ON
Green ON
Descriptions
AC power is connected
ECO mode and no battery presented
Short –circuit or Reverse polarity
Bulk charge (C.C) mode / Absorption
charge (C.V) mode
Recondition / Soft start
Défaillance de la batterie
The charger is at Float mode (Full)