Tone /Pulse - GE 21091 Guía Del Usario

4. Press the OK soft key to save your selection, and return to the main
menu. The new ringer tone is displayed for two seconds.
RINGER TONE
REGISTRATION
OK
HANDSET DISPLAY
T /P
ONE ULSE
Most telephone systems use tone dialing, however, some may still use
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
This setting may be made with the base only. Make sure the base is at the
main menu. Make sure your phone is OFF (not in TALK mode).
1. Press the CID/messages (
TONE/PULSE .
2. Press the OK soft key and SET TONE/PULSE 1TONE 2PULSE shows in
the display.
3. Use the touch tone pad on the base to select 1TONE or 2PULSE , or press
the CID/messages (
setting is 1 .
16
RINGER TONE - 2
EXIT
or ) button on the base to scroll to
TONE / PULSE
TIME
OK
SET TONE / PULSE
1 TONE 2 PULSE
OK
or ) button to scroll to your selection. The default
AREA CODE
RINGER TONE
OK
BASE DISPLAY
EXIT
EXIT
EXIT