6. Press the redial button to display the redial number.
7. Press the OK soft key again to confirm.
NOTE: If the redial number has more than an 24 digits, the redial number
cannot be stored in memory.
I
P
NSERTING A
If a pause is needed to wait for a dial tone press the # pause button on
the touch-tone pad to insert a delay in dialing sequence of a stored
telephone number (for example, after you dial 9 for an outside line, or
wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
R
, C
EVIEWING
HANGING OR
T
R
:
O
EVIEW
1. Make sure the phone is OFF (not in TALK mode).
2. Press DIR soft key.
3. Press the cid/vol (
button on the base to scroll through the stored numbers. Or use the touch-
tone pad on your handset or base to enter the memory location number.
T
C
:
O
HANGE
Use the same procedure to change a stored number as you do to store a
number except replace one stored phone number with a different one.
40
D
AUSE IN THE
D
NAME
HANDSET 1
MENU
or
) button on the handset or CID/messages (
EDIT
S
IALING
EQUENCE
S
ELETING
TORED
ANS
DIR
0 3
MEMO
317 - 123 - 4567
PETER CHAN
DEL
EXIT
N
UMBERS
or
)