Publicidad
Single table with segmented table tops
Mesa individual con tableros segmentados
6
M8
M6
9
Screw the guide screws to the
bottom of the table tops (6). Apply
the table tops, insert the flat dowels
and push the table tops together
and then fix with screws, but don't
tighten yet (7). Insert the table top
connectors and screw on tightly (8),
then tighten the other screws too.
Insertion of the optional table por-
tals (9). Screw the cable channels'
hinge mechanisms into the threa-
ded sockets on the bottom of the
table, insert the cable channels and
affix with king bolts (10). Screw the
earth lead's remaining cable shoe
onto the cable channel (11). Fit
optional flexible cable riser (12).
Use glides in the feet of the table to
level out any uneven sections in the
floor (13).
30
7
10
30°
8
For detailed assembly
instructions see pages 4–17.
Instrucciones de montaje
detalladas, ver páginas 4–17.
Publicidad
