Troubleshooting - Mellerware MA Beker III 600W Manual De Instrucciones

1. 6. TROUBLE SHOOTING
Problem
Smoke comes out of the
baking compartment or
the vents
It is difficult to take the
bread out of the baking
pan.
The ingredients are not
mixed or the bread is not
baked correctly
The appliance does not
start. The display shows
HHH
The bread rises too fast
The bread does not rise
at all or not enough
The dough rises too
much and spills over the
baking pan
26500B_IM.indd 7
All manuals and user guides at all-guides.com
Cause
The ingredients stick to the baking
compartment or on the outside of
the baking pan
The bottom of the loaf is stuck to
the kneading blade
Incorrect program setting
The START/STOP button was
touched while the machine was
working
The lid opened several times while
the machine was working
Long blackout while the machine
was working
The rotation of the kneading blade
is blocked
The appliance is still hot after the
previous baking procedure
too much yeast, too much flour, not
enough salt
or several of these causes
No yeast at all or too little
old or stale yeast
liquid too hot
the yeast has come into contact
with the liquid
wrong flour type or stale flour
too much or not enough liquid
not enough sugar
If the water is too soft the yeast
ferments more
too much milk affects the fermenta-
tion of the yeast
Solution
Pull out the plug and clean the outside of the baking
pan or the baking compartment.
Clean the kneading blade and shafts after the baking.
If necessary, fill the baking pan with warm water for
30 minutes, then the kneading blade can be easily
removed and cleaned.
Check the selected menu and the other settings.
Do not use the ingredients and start over again
Never open the lid frequently, unless it is necessary,
such as adding ingredients. And make sure that lid
was closed well after being opened.
Do not use the ingredients and start over again.
Check that the kneading blade isnt blocked by grains,
etc. Pull out the baking pan and check whether the
drivers turn. If this is not the case, send the appliance
to the customer service.
Pull out the plug, take out the baking pan and leave it
to cool at room temperature. then insert the plug and
start again.
a/b
a/b
e
c
d
e
a/b/g
a/b
f
c
2018-09-27 02:14:55 PM