Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Press (4) hood inserts into the (4) square holes.
3
Align Hood Shield with holes in hood.
5
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from drawings.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2006 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
For applications with tape, expose 2" (5 cm) of tape liner from
each end of the flanges on the hood shield.
4
Using a phillips screwdriver, install (2) center screws.
Repeat for remaining (2) holes. If applicable, remove
6
8
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 2 of 2
remaining tape liner.
hood
insert
hood shield
grommet
screw
Do not overtighten
Install (4) bump ons.