Environmental Conditions - Össur COLD RUSH Instrucciones De Uso

ENVIRONMENTAL CONDITIONS

• Operating Temperature: +10 °C to 40 °C
• Operating Humidity: 30% - 75% Relative Humidity
• Atmosphere Pressure: 700h Pa – 1060 h Pa
• Shipping and Storage Temperature: -20 °C to 60 °C
• Shipping and Storage Humidity: 10% - 90% Relative Humidity,
non- condensing
ELECTROMAGNETIC COMPATIBILITY PRECAUTIONS AND
WARNINGS
The Cold Rush Therapy System needs special precautions regarding
electromagnetic compatibility (EMC). Specifically, it needs to be installed
and put into service according to the EMC information provided as follows:
• The Cold Rush Therapy System should not be used adjacent to or
stacked with other equipment. In case adjacent or stacked use is
necessary, the Cold Rush Therapy System should be observed to verify
normal operation in the configuration in which it will be used.
• The Cold Rush Therapy System may be susceptible to electromagnetic
interference from portable and mobile RF communications devices
such as mobile (cellular) telephones.
• The Cold Rush Therapy System may be interfered with by other
equipment, even if that other equipment complies with CISPR
EMISSION requirements.
Cold Rush accessories, various pads, will not negatively affect EMC
performance of the Cold Rush Therapy System. To maintain basic safety,
do not use any other power supply other than the one provided with the
unit. Cold Rush Therapy System is intended for use in EM environment
tabulated below.
Guidance and Manufacturer's Declaration – Electromagnetic Emissions
The device is intended for use in the electromagnetic environment specified
below. The customer or user of device should assure that it is used in such an
environment.
Emissions Test
RF Emissions CISPR 11
RF Emissions CISPR 11
Harmonics Emissions
IEC 61000-3-2
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3
Electromagnetic Environment –
Compliance Guidance
Group 1 The device uses RF energy only for
its internal function. Therefore, its
RF emissions are low and are not
likely to cause any interference in
nearby electronic equipment.
Class B The device is suitable for use in all
establishments, including domestic
Class A
establishments and those directly
connected to the public low voltage
power supply network that supplies
Complies
buildings used for domestic
purposes.
11