Installing The Lid Handles; Mounting The Burner Knobs; Securing The Front Shelf Brackets; Installing The Front Shelf - Pit Boss CHARLESTON PB1230CC Instrucciones Y Recetas

12. INSTALLING THE LID HANDLES

Parts Required:
4 x Lid Handle Bezel (#20)
2 x Lid Handle (#21)
Installation:
• Remove the pre-installed hardware from the Lid Handle. From inside
the one of the Main Barrel lids, insert one screw, locking washer, and
washer to protrude to the outside. Add a Lid Handle Bezel on the
screw, then hand-tighten the screw (from the inside) into the Lid
Handle. Repeat the same installation for the other end of Lid Handle.
• Continue the same installation for the Lid Handle on the other Main
Barrel lid.

13. MOUNTING THE BURNER KNOBS

Parts Required:
3 x Burner Knob (#23)
Installation:
• Mount each Burner Knob to the front panel of the unit. Make certain
to align the flat portion of the valve stem with the flat portion of
the Burner Knob. Push the Burner Knob firmly onto the valve stem to
ensure it is firmly seated.
14. INSTALLING THE FRONT SHELF BRACKETS
Parts Required:
1 x Front Shelf Bracket / Left (#17)
1 x Front Shelf Bracket / Right (#18)
6 x Screw (#A)
6 x Washer (#B)
6 x Locking Washer (#C)
Installation:
• Attach one Front Shelf Bracket to the front of the grill barrel by using
three screws. Install each screw halfway, then tighten completely
when all three screws are mounted and aligned properly. Repeat the
same installation for the other Front Shelf Bracket.

15. MOUNTING THE FRONT SHELF

Parts Required:
1 x Front Shelf (#19)
2 x Screw (#A)
2 x Bushing (#H)
Installation:
• Place the Front Shelf onto the Front Shelf Brackets. From underneath, add
the bushing onto the screw, then install the screw into the Front Shelf
Bracket to secure. Repeat installation for the other side of the front shelf.
NOTE: When installed correctly, the front shelf can be raised (for use)
and lowered (for storage) with ease.
14
12
21
20
13
23
23
23
14
17 18
15
H A
21
20
19