Technical Specifications - Bowers & Wilkins CDS3 El Manual Del Propietario

6002 CDS3 OM Inner Iss1
Technical Features
Description
Drive units
Frequency range
Frequency response
Dispersion
Sensitivity
Harmonic distortion
Nominal impedance
Crossover frequencies
Power handling
Max. recommended cable impedance
Frame size
Cut-out size
Min. wall depth required
Protrusion from wall surface
Net Weight
44
22/3/07 3:52 pm Page 44
CDS3
Nautilus™ tweeter
Woven Kevlar ® brand fibre cone bass/midrange
2-way in-wall selectable dipole/monopole surround system
1x ø25mm (1 in) alloy dome high-frequency
2x ø80mm (3 in) midrange/high frequency
1x ø130mm (5 in) woven Kevlar
-6dB at 63Hz and 42kHz (monopole mode)
-6dB at 63Hz and 15kHz (dipole mode)
85Hz – 22kHz ±3dB on reference axis (monopole mode)
85Hz – 10kHz ±3dB power averaged over front hemisphere (dipole mode)
Monopole mode: within 2dB of reference response
Horizontal: over 40˚ arc
Vertical: over 10˚ arc
Dipole mode: horizontal figure of eight
Effective null zone ±20º (250Hz – 15kHz)
89dB spl (2.83V, 1m)
2nd and 3rd harmonics (90dB, 1m)
<1% 130Hz – 20kHz
8Ω (minimum 3.3Ω)
4kHz (monopole mode)
250Hz (dipole mode)
25W – 100W into 8Ω on unclipped programme
0.1Ω
Height: 285mm (11.2 in)
Width: 373mm (14.7 in)
Height: 247mm (9.75 in)
Width: 335mm (13.25 in)
89.5mm (3.52 in) from wall surface
70.5mm (2.78 in) (including grille)
3.9 kg (8.6 lb)
® cone bass/midrange
254mm (10.0 in) with PMK
343mm (13.5 in) with PMK