Symbols On The Product - SMA SUNNY TRIPOWER 15000TL Instrucciones Breves

SMA Solar Technology AG
Change to the names and units of grid parameters to comply with the grid-
connection requirements in accordance with Regulation (EU) 2016/631
(valid from April 27, 2019)
To comply with the EU grid-connection requirements (valid from April 27, 2019) the names
and units of grid parameters were changed. The change is valid from firmware version
≥ 3.00.00.R. Names and units of grid parameters for inverters with firmware version
≤ 2.99.99.R are not affected by this change and remain valid.
3

Symbols on the Product

Symbol Explanation
Beware of a danger zone
This symbol indicates that the product must be additionally grounded if addi-
tional grounding or equipotential bonding is required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Danger to life due to high voltages in the inverter; observe a waiting time of 5
20 min
minutes
High voltages that can cause lethal electric shocks are present in the live com-
ponents of the inverter.
Prior to performing any work on the inverter, disconnect it from all voltage
sources as described in this document.
Observe the documentation
Observe all documentation supplied with the product.
Inverter
Together with the green LED, this symbol indicates the operating state of the in-
verter.
Observe the documentation
Together with the red LED, this symbol indicates an error.
No function
Quick Reference Guide
3 Symbols on the Product
STPTL-30-IS-xx-16 9