Power On / Off / Standby; Adjusting The Setup Parameters - Kongsberg Simrad Marine TV45 Manual

English-12

2.3 Power on / off / standby

The antenna unit is controlled by the control unit, which is turned on by press-
ing the (power) key. To enter Standby mode, press the
after the initialization is completed.
When the control unit is in standby mode there will be no power supply to
the antenna.

2.4 Adjusting the setup parameters

Modifications can only be made in the setup menu. In the main menu only the
flashing functions can be selected.
1. Turn on the control unit. The display shows
tialization is in progress.
2. After the initialization is completed, you are in the main menu with the
display flashing
1.5.
3. If the password is entered correctly, you are now in the setup menu. The
display shows
4. Tracking is preset to On. Toggle between On and Off with the
Off, tracking is deactivated (see section 3.1). With On, tracking is activated
i.e. the satellite can be tracked. Press
5. The display shows
to select or
6. Fastscan is preset to On. Toggle between On and Off with the
section 5.4). With On, Fastscan is activated i.e. the search for the correct
satellite works faster (US only). Press
7. The display shows
select.
8. The display will show the standard setting
Europe. By pressing the
to select. The display will return to:
The standard setting
. The setup menu has password access - see section
Setup
, press
Tracking
. Press
Tracking
to continue from point 7.
FastScan
key you can change the LNB settings. Press
is the only one supported by a standard system.
lin 0
Init
to select.
to select.
to go to
to select.
. Press to go to
lin 0
LNB Type
Simrad Marine TV
key from any menu
(flashing), meaning ini-
mode. Press
FastScan
. Press
LNB Type
which is valid for
.
key. With
key (see
to