Kongsberg Simrad Marine TV45 Manual página 22

English-22
now on, the antenna unit will take over the satellite positions from the
receiver. The display interchanges between
X is the desired storing position. After the satellite is located, the display
will continue to show
mode.
If
Auto Sat
by the receiver (or not activated). The setting is "DiSEqC 1..4" or similar.
Refer to the user manual of the receiver. The TV45 does not support this
feature.
If the selected satellite is not stored in the antenna unit, the display inter-
changes between
case, check the receiver parameters and store the satellite in the antenna unit,
meaning that the search mode has to be started again (see chapter 3).
You can now switch to the main menu (flashing display) by pressing the
key.
X. The satellite tracking system is now in TV
Sat
does not appear in the display, the feature is not supported
X (the selected storage position) and
Sat
Simrad Marine TV
and
scanning
no Data
X, where
Sat
. In this