Delete Stored Data - Kongsberg Simrad Marine TV45 Manual

English-20
lite) and
UpDate?
4. To abandon, press
5. If you chose 'abandon', the display shows
If you chose 'confirm', the display interchanges between a flashing
and
updating
6. After correct calibration, the display shows
and then the system automatically jumps to the TV mode. If the update was
not successfull the display shows
menu item
Upd Sat
Next time the antenna is turned on, the stored angles and frequency data of the
satellite are for the current area. This procedure can be repeated in every other
region (at a distance of 200-300 km), because the angles of the satellite move
with every change of the vessel's position.

4.3 Delete stored data

To delete stored satellite positions, the following steps must be completed:
1. Go to the setup menu: press
(flashing), then press
is correct you are in the Setup menu.
2. The display now shows
appears. Press
can only appear if there are satellites stored in the system.
Del Sat
3. The display shows
be deleted. Press
4. The display interchanges between
/ to abandon, press
5. If you chose 'confirm' the display shows
you chose 'abandon', the display shows
6. In both cases, the display will return to
.
/ to confirm (if the picture quality is optimal), press
.
checking
. In this case, please repeat the calibration.
repeatedly until the display shows
, Enter password, see section 1.5. If the password
Tracking
.
X, where X is the first satellite storage position to
Sat
and .
cancel
complete
and the system returns to the
Err Save
. Press repeatedly until
X and
Sat Delete?
complete
.
cancel
.
Del Sat
Simrad Marine TV
for a brief moment.
for a brief moment
Setup
Del Sat
. To confirm, press
for a brief moment. If