Adjustment Of The Lnb Type; Special Functions Via The Standby Mode - Kongsberg Simrad Marine TV45 Manual

English-24

5.2 Adjustment of the LNB type

In order to change the LNB type, follow the below procedure:
1. To go to the setup menu, press
(flashing), then press
is correct you are in the Setup menu with the display:
2. Press repeatedly until
3. The display will show the standard setting
Europe. By pressing the
to confirm. The display will return to:
The standard setting
Reception from satellites with a rotated skew will require an optional LNB
mounting with variable skew (see Appendix D). Reception from circular
polarized satellites will require a circular LNB type.
4. Press repeatedly until the legend
play shows
Setup
You are now back in the main menu and can switch to other satellites by press-
ing the key or make adjustments in the setup menu.

5.3 Special functions via the standby mode

The following information can be obtained via the standby mode: software ver-
sion of antenna unit and control unit, serial number and operating hours counter.
1. Turn on the control unit. The display shows
started. Wait for the initialization to be completed, and then press the
to enter standby mode.
2. To obtain the special functions, press and hold the
between the following functions with the
• serial number.
• operating hours counter.
• software version of the antenna unit:
• software version of the control unit:
3. After releasing the
repeatedly until the display shows
, Enter password, see section 1.5. If the password
LNB Type
key you can change the LNB settings. Press
is the only one supported by a standard system.
lin 0
quit
(flashing).
key, the display returns to
appears. Press
which is valid for
lin 0
.
LNB Type
appears, then press
, meaning initialization is
Init
key:
VA X-XX
VC X-XX
Standby
Simrad Marine TV
Setup
.
Tracking
to confirm.
. The dis-
while toggling
.
key