PULOX PO-200A SOLO Manual De Instrucciones página 24

Alarm Set: Press the button briefly to select „Alarm Set". Press the
button for a few seconds to go into the sound prompt menu. For
details on setting the limit values, see c. Set limit values.
Exit: Short press the button to select "Exit", then long press the button
to exit the main menu and return to the measurement interface.
b. Sound prompt menu
Pulse Alarm: Press the button briefly to select „Pulse Alarm". Press the
button for a few seconds to go to the Pulse limit value settings, see c.
Set limit values for details.
SpO2 Alarm: Press the button briefly to select „ SpO2 Alarm". Press
the button for a few seconds to go to the SpO2 limit value settings, see
c. Set limit values for details.
Exit: Briefly press the button to select "Exit", then long press the
button to exit the alarm menu and return to the main menu.
c. Set limit values
Dir: When you enter the limit value settings, „Dir" is already selected.
Long press the button to switch between up (increase the value) and
down (decrease the value).
High: Briefly press the button to select "High". Long press the button
to set the upper limit prompt of pulse or SpO2
direction in which you want to change the value is correctly set to up
or down. Lower limit can not exceed the upper limit.
Low: Briefly press the button to select "Low". Long press the button to
set the lower limit prompt of pulse or SpO2
direction in which you want to change the value is correctly set to up
or down. Lower limit can not exceed the upper limit.
Exit: Briefly press the button to select "Exit", then long press the
button to exit and return to the alarm menu.
6.2. Caution
1. The finger should be placed properly (see the attached illustration
of this manual, Figure 4), or else it may cause inaccurate
measurement.
2. The SpO2 probe and photoelectric receiving tube should be
→ Set Pulse Limits
→ Set SpO2 Limits
→ Exit Sound Prompt menu
→ Direction: up, down
→ Upper limit prompt
→ Lower limit prompt
Make sure that the
.
Make sure that the
.
EN