Abicor Binzel iSTM Instructivo De Servicio página 38

9 Maintenance and cleaning
9.2 Cleaning the iSTM ABIROB
Set screw M3x3
1
2 compression springs
2
2 O-rings 7x1.5
3
Cleaning the iSTM ABIROB
Fig. 12
EN - 18
®
W
1 2
8
7
4 O-rings 3.5 x 1.5
4
2 compression sleeves
5
2 balls
6
®
W
1 Remove balls (6), compression springs (2) and compression sleeves (5),
check them for damage and replace them if necessary.
WARNING
Risk of injury
Serious injuries caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in
particular safety goggles.
2 Clean the iSTM ABIROB
3 Grease the O-rings (3) with sealing grease (included in the scope of
delivery).
4 Mount the O-rings (3), (4) onto the compression sleeves (5).
5 Mount the balls (6), compression springs (2) and compression sleeves (5).
6 Dismount the set screw (1) and gas duct (8) and check them, if necessary
replace and mount them.
3
6
iSTM ABIROB
7
Gas duct
8
®
W (7) with compressed air.
iSTM
4
5
®
W