Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
iSTM
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
2 Open lock ring, unscrew fastening screw.
6.2 Mounting the hose assembly on page EN-9
3 Pull out hose assembly.
4 Disconnect torch neck and remove it.
6.3 Attaching the ABIROB
6.4 Attaching the ABIROB
6.5 Attaching the ABIROB
5 Dismount the iSTM from the robot.
6.1 Fastening the iSTM to the robot on page EN-9
For disposal, the local regulations, laws, provisions, standards and guidelines
must be observed. For the iSTM to be properly disposed of, it first must be
dismounted.
See 11 Dismounting on page EN-20
This product consists for the most part of plastics, steel and non-ferrous metals.
Steel and non-ferrous metals can be molten in steel and iron works and are thus
almost infinitely recyclable.The plastic materials used are marked in
preparation for sorting and separation of the materials for later recycling.
Oils, greases and cleaning agents must not contaminate the ground and not
enter the sewerage. These materials must be stored, transported and disposed
of in suitable containers. Please observe the relevant local regulations and
disposal instructions of the safety data sheets given by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the manufacturer
of the consumables.
ABICOR BINZEL has reduced the packaging for shipping to a minimum.
Packaging materials are always selected with regard to their possible recycling
ability.
®
A torch neck on page EN-12
®
W torch neck on page EN-13
®
GC torch neck on page EN-14
12 Disposal
EN - 21
Publicidad
Tabla de contenido
