Accessories; Safety Information; Rules For Safe Operation - Minipa MX-1050 Manual De Instrucciones

1) OVERWIEW
The MX-1050 is a digital LCR bridge with smart detection, double LCD display with
19999/1999 counts. It has measurements in the series and parallel modes that
can be used to select the quality factor, dissipation factor, phase place angle and
measure matches.
It performs measurements in five frequency ranges: 100Hz, 120Hz, 1kHz, 10kHz and
100kHz. It has USB interface, communication by software, recording in the display,
15mA operation current with low consumption and 9V battery.

2) ACCESSORIES

Open the box and check if the following items are missing or damaged:
Item
1
2
3
4
5
6
In case the components are missing or is damaged, contact your dealer immediately.

3) SAFETY INFORMATION

Use the instrument only as specified in this instruction manual, otherwise the
protection provided by the instrument may be compromised.
Warning identifies conditions and actions that may damage the instrument or
equipment under test if any of these warnings is neglected.
Caution identifies conditions and actions that can expose the user to electric
shock, serious injury or even death if any of these warnings are neglected.
Note identifies the information which the user must pay special attention.

4) RULES FOR SAFE OPERATION

Warning
To avoid possible electric shock or personal injury and prevent possible
damage to the instrument or equipment under test, follow these rules:
Test leads type claw (SMD components test)
Multifunction Adapter
Short circuit Bar
CD with software
Instructions Manual
Caution
Description
USB Cable
2
Qty.
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece