Display Description; Display Indications - Minipa MX-1050 Manual De Instrucciones

B. DISPLAY DESCRIPTION
Figure 2
1. USB Communication
2. Short Circuit / Opening Circuit Calibration
3. Auto Power Off (APO)
4. Relative Mode
5. Main Display
6. Assistant Display
7. Graph Bar
8. Filter Mode Enabled
9. Hold Mode
C. DISPLAY INDICATIONS
LCR: L, C or R functions indicator.
Lp: Inductance measure mode in parallel.
Ls: Inductance measure mode in series.
Cp: Capacitance measure mode in parallel.
Cs: Capacitance measure mode in series.
Rp: Resistance measure mode in parallel.
Rs: Resistance measure mode in series.
DCR: DC resistance measure mode.
D: Dissipation factor.
Q: Quality factor.
θ: Localization phase angle.
ESR: Match series resistance.
EPR: Match parallel resistance.
DUT: Device in test.
5