Commissioning; Installing The Eps945 System Software; Saving The Sample Test Sequence - Bosch 1 687 010 183 Instrucciones De Funcionamiento

en 2� | � ��� ��� ��� � � ��� ��� ��� | Product description
�.�

Commissioning

�.�.� Installing the EPS9�5 system software
i
The current version (2.77) of the EPS945 system
software is a prerequisite for testing non-Bosch
pumps. Install the current system software on your
KMA PC. Installation of the system software is de-
scribed in the program description 1 689 979 859.
|
1 689 979 986 2009-12-11
�.�.2

Saving the sample test sequence

Before you can edit the sample test sequence for the
test, you need to copy it onto your KMA PC.
i
Refer to the "Data saving" section of the EPS 945
program description (1 689 979 859) for details.
Procedure:
1. Insert the "EP Software" CD into the
CD/DVD drive.
2. Start the EPS945 system software.
3. In the "main menu" dialog box, select the "Configu-
ration >> System" menu.
4. Select the DATA SAVE option.
5. In the "Selection of destination" field, select drive
D:\ (CD-ROM).
? The "Destination components" field shows the
sample test sequence
6. Press <Space> to select the sample test sequence.
7. Press <F5> to load the sample test sequence to the
database.
? A "Note" dialog box containing the following mes-
Data being loaded. Please
sage appears:
wait...
.
8. Exit the "Data save" dialog box by pressing <F�2>.
" "
The sample test sequence is now available in the da-
tabase for later use.
904xA0xxx
.
Robert Bosch GmbH