Significance Of These Instructions; Proper Working Order Of The Device; Work On The Electrical Equipment Of The Device; Personal Protective Equipment - Sartorius PMA.Evolution Instrucciones De Instalación

2.4

Significance of these Instructions

Failure to follow the instructions in this manual can have
serious consequences, e.g., exposure of individuals to
electrical, mechanical, or chemical hazards.
Before working with the device: Read the instructions
t
carefully and completely.
If these instructions are lost: Request a replacement or
t
download the latest version from the Sartorius website
(www.sartorius.com).
The information contained in these instructions must be
t
available to all individuals working on the device.
2.5

Proper Working Order of the Device

A damaged device can cause malfunctions or lead to hard-to-
detect hazards.
Only operate the device when it is safe and in perfect
t
working order.
Immediately disconnect the damaged device from the
t
power.
Have any malfunctions or damage repaired immediately
t
by the Sartorius Service.
2.6 Work on the Electrical Equipment of the
Device
Work on and modifications to the electrical equipment of the
device may only be carried out by Sartorius Service personnel.
The device may only be opened by Sartorius Service personnel.
Seal on Scales Verified for Use in Legal
Metrology
Legislation requires that a seal be affixed to
verified scales. On Sartorius devices, this seal takes
the form of a sticker with the "Sartorius" logo.
If the seal is removed, the validity of verification
will become void and you must have your scale
re-verified. The verification supplied here is for
verified weighing instruments for use in the EEA.
Please keep it in a safe place.
2.7

Personal Protective Equipment

Personal protective equipment to protect against risks arising
from the material being processed.
When the workplace or the process, in which the device
t
is used, requires personal protective equipment: Wear
personal protective equipment.
2.8

Safety Instructions Concerning Operation

of the Device

− Take care that the glass panel of the operating display is
not damaged (e.g., by falling objects, impact, or extreme
pressure). If the glass panel is damaged, disconnect the
device from the power supply immediately.
− The surface of the operating display should not be touched
with pointed, sharp, hard, or rough objects. You should
only use the touch pen provided or your fingertips. Do not
use parts of clothing (e.g., sleeves) or sponges for cleaning
because these can scratch the surface (e.g., due to rivets or
buttons in the sleeve or sand in the sponge).
− Avoid generating static electricity on the glass panel of
the operating display and plastic casing.
Danger of Damage to the Scale!
Never close a paint can using a hammer while
it is still on the weighing pan.
When closing, place the paint can on a firm,
stable surface.
3

Installation

3.1

Scope of Delivery

Model
Large weighing pan: d 233 mm x
Small weighing pan: d 180 mm –
USB cable
Ex-link converter
Potential equalization cable
Link cable from converter to
scale
Installation instructions
3.2

Unpacking

Procedure
Open the packaging, making sure to remove all parts
t
carefully.
After unpacking the device, check it immediately for any
t
external damage.
If the device is stored temporarily: Store the device
t
according to the ambient conditions (ambient conditions
see Chapter "8.1 General Data", page 11).
Save the box and all parts of the packaging for any future
t
transport. All cables should be unplugged when
transporting.
3.3

Selecting a Setup Location

Select the right setup location:
− Set up the device on a stable, even surface that is not
exposed to vibrations.
− Maintain free access to the device at all times.
− The devices must be handled carefully according to the
IP protection rating. The environment must be suitably
secured.
EVO1X | LAB1X Installation Instructions
English
PMA.Evolution PMA.HD
–
x
x x
x x
x x
x x
x x
5