EU-TYPE EXAMINATION CERTIFICATE
1
Equipment or Protective systems intended for use in Potentially
2
Explosive Atmospheres - Directive 2014/34/EU
EU-Type Examination Certificate No:
3
4
Equipment or protective system:
(Type Reference and Name)
Name of Applicant:
5
6
Address of Applicant:
7
This equipment or protective system and any acceptable variation thereto is specified in the schedule to
this certificate and documents therein referred to.
8
FM Approvals Europe Ltd, notified body number 2809 in accordance with Article 17 of Directive
2014/34/EU of
26 February 2014, certifies that this equipment has been found to comply with the Essential Health and
Safety Requirements relating to the design and construction of equipment intended for use in potentially
explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential report number:
9
Compliance with the Essential Health and Safety Requirements, with the exception of those identified in
item 15 of the schedule to this certificate, has been assessed by compliance with the following documents:
EN 60079-0:2012+A11:2013, EN 60079-11:2012, EN 60079-15:2010
10
If the sign 'X' is placed after the certificate number, it indicates that the equipment is subject to specific
conditions of use specified in the schedule to this certificate.
11
This EU-Type Examination certificate relates only to the design, examination and tests of the specified
equipment or protective system in accordance to the directive 2014/34/EU. Further requirements of the
Directive apply to the manufacturing process and supply of this equipment or protective system. These are
not covered by this certificate.
12
The marking of the equipment or protective system shall include:
II 3 (2)G Ex nA ic [ib Gb] IIB T4 Gc Ta = 0°C to +40°C
II 3 (2)G Ex nA [ib Gb] IIB T4 Gc
Digitally signed by Damien Mc Ardle
DN: cn=Damien Mc Ardle, o=FM Approvals,
ou=FM Approvals Europe Ltd,
email=damien.mcardle@fmapprovals.com, c=IE
Date: 2019.04.26 07:45:15 +01'00'
Damien Mc Ardle
Certification Manager, FM Approvals Europe Ltd.
Issue date: 26
April 2019
th
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Europe Ltd. One Georges Quay Plaza, Dublin. Ireland. D02 E440
T: +353 (0) 1761 4200 E-mail:
atex@fmapprovals.com www.fmapprovals.com
F ATEX 020 (Mar/2019)
FM16ATEX0029X
YCO14-Y
Ex-Link Converter
Sartorius Lab Instruments GmbH & Co. KG
Otto-Brenner-Strasse 20
Goettingen 37079
Germany
3049987 dated 27
April 2015
th
and EN 60529:1991+A1:2000+ A2:2013
Ta = 0°C to +40°C
Page 1 of 3
EVO1X | LAB1X Installation Instructions
71