Siemens SINUMERIK 840D sl Manual De Puesta En Servicio página 435

Bibliografía:
A.1 Ejemplo: Fichero basesys.ini
Fichero de configuración basesys.ini
El fichero basesys.ini adjunto tiene el siguiente ajuste previo:
; Default Linux basesystem configuration
; ------------------------------------------------------------------
;
; section ID is for Windows compatibility and is ignored
[ExternalInterface]
; If ExternalIP is set, you can force the external Ethernet
; interface to use a fixed IP addr. etc instead of using DHCP
; if a Hostname is set, it even overrides one received by DHCP
;ExternalIP=210.210.210.210
;ExternalNetMask=255.255.255.0
;Gateway=210.210.210.1
;Nameservers=210.210.210.1 210.210.210.2
;Timeservers=210.210.210.3
;Hostname=somename
;Domain=example.com
; if ExternalIP is empty (default), DHCP is used with the following
; ClientID. The default is "@MAC" to use the MAC address,
; alternatives are "@NAME" to use the hostname (Hostname above)
; or any other arbitrary string.
;DHCPClientID=@MAC
[InternalInterface]
; With InternalIP and InternalNetMask (both must be set together),
; you can change the address on the internal/TCU/automation net.
; This should not be needed normally
;InternalIP=192.168.214.1
;InternalNetMask=255.255.255.0
Sistema operativo NCU
Manual de puesta en servicio, 07/2006, 6FC5397-8CP10-0EA0
A
43