Bruker AXS S4 EXPLORER Guía De Preinstalación página 201

1 Room Planning and Pre-Installation
Room Planning
Careful room planning and the completed pre-installation are prerequisites for the rapid final assembly
and setup of the X-ray spectrometer by Bruker AXS. Room planning and pre-installation should be
carried out with the assistance of your Bruker AXS service partner.
Area of Installation
The installation of the devices must be planned so that the spectrometer is accessible from the front
and that the cooling air can flow without restrictions (i.e. approx. 15 inch distance from the wall is rec-
ommended).
If an automation with conveyor belt is planned, the spectrometer must be placed so that the sample
magazine is accessible from the rear side.
The floor should be levelled and have a suitable load capacity.
Avoid direct sunlight.
DOC-M80-ZXX004 V6 – 03.2007 1-1