Bruker AXS S4 EXPLORER Guía De Preinstalación página 232

Introduction
Electrical Specifications
Tab. 2-2: Technical Specifications: Electrical Specifications
X-ray Generator and Control Electronics
Mains Supply Voltage
(Actual nominal voltage is factory-preset and
printed on the system label located at the rear
side of the spectrometer system.)
Frequency Range
Maximum Power Consumption
Overvoltage Category according IEC 664
Spectrometry Components
Tab. 2-3: Technical Specifications: Spectrometry Components
X-ray Tube
X-ray tube
Nominal high voltage
Nominal current
Nominal power
Anode material
2-22
S4 PIONEER X-ray Spectrometer
On request only:
230 / 400 VAC (+/- 10%) 1-phase, 50 Hz
240 / 415 VAC (+ 6% /-10%) 1-phase, 50 Hz
208 VAC (min. 200 V/+ 10 %), 60 Hz
Three Phases Supply:
3 x 230 VAC (+/- 10%)
3 x 240 VAC (+6%/-10%)
47 Hz - 53 Hz (60 Hz on request)
max. 8 kVA
II
Max. 60 kV DC
Max. 150 mA DC
Max. 4.0 kW
Rhodium
DOC-M80-ZXX004 V6 – 03.2007