General Safety Rules; Description - Rancilio S20 Uso Y Manutención

1. GENERAL SAFETY RULES

● Don't leave the packing elements (plastic bags,
polystyrene foam, nails, cardboard, etc.) within the
reach of children, as these elements are potential
sources or danger.
● Check that the data on the machine corresponds
to that of the electrical supply network, before
connecting the equipment.
● Adaptors, multiple sockets and /or extensions must
not be used.
● In doubt, request an accurate check on of the plant
by qualified personnel. The electric system must
be provided with the following safety devices:
- efficient earth connection;
- section of conductors suitable for absorption
capacity
- efficient earth leakage protection circuit breaker.
● Install the machine on a water repellent surface
(laminate, steel, ceramic, etc.) away from heat
sources (oven, cooking stove, fireplace, etc.) and
in conditions in which the temperature may not go
below 5°C. KEEP WARM.
● Do not leave the machine exposed to atmospheric
agents or place them in damp rooms such as
bathrooms.
● Do not obstruct the suction or dispersion grills and
do not cover with cloths, etc.
● Keep the packed machine in a dry place, not
exposed to atmospheric agents and in conditions
in which the temperature does not go below 5°C.
Do not stack more than three items of the same
kind. Do not place heavy items on the packaging.
● In an emergency, such as fire, unusual noise,
overheating, etc., take immediate action,
disconnecting the power and closing gas and water
taps.
● Only use original spare parts in order to avoid
compromising the safety and proper functioning
of the machine.
Erroneous installation may cause damage to
people, animals and things for which the
manufacturer cannot be held responsible

2. DESCRIPTION

The machines in the S20 series have been designed
to prepare espresso coffee and hot beverages.
A positive-displacement pump inside the machine
powers the heater in which the water is heated. By
pressing the appropriate buttons, water is supplied
to the spouts in the form of hot water or steam,
according to needs.
In the model with an economizer, the water to be used
for the beverages is supplied directly by the water
supply, pressurized by the pump and immediately
heated by the steam produced by the boiler.
Model S24 has an incorporated water-tank and does
not, therefore, need to be connected to the
waterworks. A water-softener inside the tank softens
the water, filtering the calcium salts in it.
The machine consists of a steel supporting structure
on which the mechanical and electrical components
are fitted. These are completely covered with panels
in varnished steel and stainless steel.
The beverages are dispensed at the front of the
machine, where all the buttons, control devices and
dispensers are to be found.
There is a cup-warming plate on the top of the
machine.
73