Maintenance; Side Brushes; Side Wheels And Castor; Gap Sensors - Amibot Swift Manual Del Usuario

EN

Maintenance

Side brushes

marked with an "L" and the right brush is marked with an "R".
NOTE: Side brushes must be replaced if you notice that their original shape has
changed.

Side wheels and castor

Gap sensors

Unclip the side brushes by gently pulling
them upwards
clean water. Dry side brushes well before
reusing them. Check that the left brush is
10
and rinse
Wipe the side wheels with a dry
cloth to remove built up dust.
Use a slotted screwdriver to
remove the castor from its
frame and wipe it clean. Remove
the hair and other debris caught
around the axle.
The gap and power sensors on
the bottom of the robot must
be regularly cleaned with a soft
cloth. Never let the sensors get
wet.
them under