Hach SD900 Refrigerated Sampler Manual Básico Del Usuario página 11

Install multiple bottles
When multiple bottles are installed, a distributor arm moves the sample tube over each bottle.
Sample collection automatically stops when the specified number of samples have been collected.
1. Clean the sample bottles. Refer to
2. Assemble the sample bottles as shown in
first bottle goes next to the bottle one indicator in the clockwise direction.
3. Put the bottle assembly in the sampler. For eight or more bottles, align the wires in the slots in the
bottom tray.
Figure 5 Multiple bottle installation
1 Retainer (1322)
2 Retainer (1056)
3 Bottle one indicator
Clean the sample bottles
Figure 5. For eight or more bottles, make sure that the
4 8–24 bottle tray (1511)
5 Slot for bottle tray
6 Floor of refrigerated sampler
on page 10.
7 Front of sampler
8 Removable tray (AWRS)
(5697600)
9 Insert (refrigerated sampler)
(2038)
English 11