Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
2
Place the plastic bushings into the bracket
mounted on the windshield.
Insert the arm assembly into the bushings.
Be sure the holes line up all the way
through the metal and plastic bushings.
Then insert the knob through the assembly
and tighten.
See Figure 2.
NOTES
• If mirror arm and head assembly is
removed, leave the plastic bushings in
place and reinstall the knob and tighten for
storage.
• The Philips head screws on the rear of
the mirror head can be tightened to adjust
the tension on the adjustable ball.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund
International. We take the utmost pride in our products and want you to enjoy years of satisfaction
from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
800-328-2409 • Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
Page 2 of 2
Figure 2
Figure 3
JK Wrangler
Installation
Publicidad
