Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL. MZ-505C
Special indication characters
shrt
Indicates short connectors for calibration mode
OPEN
Indicates open connectors for calibration mode
CAL
Indicates calibration mode.
FUSE
Indicates damaged or open fuse.
3.3 How to operate
CAUTION
Note:
For achieving optimum precision for all L, C and R
measurements at either the highest or lowest ranges, it is
recommended to calibrate the meter before testing.
3.3.1 Inductance measurement
1.
Press the
2.
Press
measurement.
3.
Insert an inductor into component receptacle socket or
connect the test clip to the component leads as required.
4.
Press
5.
Press
display.
04/2015
[2] button to turn on the meter.
[8]
button
[6] button to select testing frequency.
[9] button to select Q factor for secondary
to
select
inductance
(L)
Page 13
Publicidad
Capítulos
Tabla de contenido
