Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.3 Fuse replacement
The meter can self-detect if its input protective fuse is either
open or damaged. In this case, the LCD will display the symbol
FUSE
"
" and an audible beep will sounds continuously, warning the
user to replace the damaged fuse to maintain the instrument
operating. While replacing the fuse, the power of the meter must be
completely shut off.
1.
Loosen screw with suitable screwdriver and remove battery
cover as figure 10.
2.
Loosen screws with suitable screwdriver and remove bottom
cover as figure 11.
3.
Replace the damaged fuse with specified one.
FUSE TYPE SHOULD BE 5 x 20 mm. and:
AVOIDING THESE DIRECTIONS COULD DAMAGE THE EQUIPMENT
Page 30
Figure 8.- Battery replacement
0.1 A
F
INSTRUCTION MANUAL. MZ-505C
250 V
04/2015
Publicidad
Capítulos
Tabla de contenido
