Operating Instructions; Autopower Down; Continuous Mesurement; Power Switch - Promax MZ-505C Manual De Instrucciones

INSTRUCTION MANUAL. MZ-505C

4 OPERATING INSTRUCTIONS

4.1 Autopower down

If unused for about 10 minutes, the meter will power down
automatically. Press
mode.
When the power is down, press
meter. The operating condition return to what they were before the
power was last turned off.
In the MIN MAX record mode, RS-232 communication mode or
using DC power-adaptor auto-power down function is disabled
automatically.

4.1.1 Continuous Mesurement

In the power down mode, Push
the APO OFF annunciator appears. Will put the meter into the
continuous measurement mode.

4.1.2 Power Switch

The
microcomputer failure status press
off.
04/2015
[2] button switches to resume power-on
[2] button turns the meter on or off. In the
[2] button to turn on the
[2] button 2 seconds. Until
[2] button until the meter
Page 17