Min/Max Button - Promax MZ-505C Manual De Instrucciones

4.8 MIN/MAX BUTTON

Press
auto shut down function. In addition to power and hold key, the other
keys cannot be activated. When the meter samples about 6 times,
and then beeper will emit a sound. When a new Max/Min data being
recorded and then beeper will emit 2 sounds.
Main display value (second display value) cycles through
[6] present value (parameter value) → Max value (parameter value)
→ Min Value (parameter value) → Max value minus Min value
(times to test) → The Average Value's displauy (times to test).
The meter will ignore and not to record if overload ("OL")
situation happens in the comparative processes or in the
capacitance range 50 counts.
The average value's display is true average recording. It can
save up to 3000 times, the "AVG" annunciator will flash when
recording times reaching 2991 to 3000 times. When recording over
3000 times the "AVG" will stop to record and it will also display the
average value on the LCD. The meter continues to record the
MAX/MIN value.
Under the MAX/MIN function, press
recording temporarily but store the former recording value in
advance, pres
In order to prevent any mistakes or losses taken, you have to
press 2 sec to exit the Max/ Min function and cancel the original
recordings.
Page 20
[6] to enter the MIN/MAX/AVG mode, and stop the
[4] again to go on recording.
INSTRUCTION MANUAL. MZ-505C
[4] key to stop
04/2015